If a class doesn’t appear in your schedule, but needs to be added, you’ll create the class using Schedule New Course.
This could happen if it’s a new class that hasn’t been offered before, or if the class wasn't offered or was cancelled in the term that was copied to make the new term.
Note: The Schedule New Course process is not used for entering a new course into the Course Catalog. If the course doesn’t exist in the Course Catalog, your department will need to submit a Course Action Form in order to have a new course added.
Login to SIS with your CWRU ID and associated passphrase. From the Staff Home page, select the SOC WorkCenter tile, and then choose Schedule New Course.
Alternatively, use the menu and navigate to Curriculum Management > Schedule of Classes > Schedule New Course.
The Schedule New Course screen appears.
Click the Look up Academic Institution icon and select CASE1 if it is not already populated.
Click the Look up Term icon and select the appropriate term.
Click Search.
All active courses listed for your academic organization in the Course Catalog appear in the search results. Select the course that is to be added to the schedule.
Select the class you want to add. The Basic Data tab appears.
Click the Look up Session icon and select the appropriate session in which the class will be offered. For example, if this will be offered in the regular academic session select Regular or enter 1 in the Session field.
Enter the number of this class section into the Class Section field. For example, if this is the first section of this class, enter "100". A Section number identifies a class within its course offering for a term. Do not use section numbers less than 100.
If a course has only one component type, such as Lecture or Research, section numbers start at 100 and are incremented by 1 for each new section.
For example, if BIOL 116 has 3 class sections in a term, it will look like this:
- BIOL 116 100-LEC
- BIOL 116 101-LEC
- BIOL 116 102-LEC
If a course has more than one component type (most commonly lecture/lab or lecture/lab/recitation), the primary enrollment section (the one students must enroll in before enrolling in other components of the course) is numbered 100 and the numbers for subsequent instances of the same component type are incremented by 100.
For example, if PHYS 115 has two lectures for all its labs, the lectures will look like this:
- PHYS 115 100-LEC
- PHYS 115 200-LEC
The first lab section associated with lecture 100 will be numbered 110 and the numbers of subsequent labs associated with the same lecture will be incremented by 1.
For example:
- PHYS 115 100-LEC
- PHYS 115 110-LAB
- PHYS 115 111-LAB
The same pattern is followed for the second lecture.
- PHYS 115 200-LEC
- PHYS 115 210-LAB
- PHYS 115 211-LAB
Press [Tab] on your keyboard.
The Class Section number copies to the Associated Class number field. If this section is associated with a section other than itself, please see Schedule Class with Multiple Components for further directions.
Click the Meetings tab.
Note that the Class Sections group box is still displaying the newly created class section, as indicated in the Class Section field.
Select Yes or No for the Final Exam, if available.
The Final Exam field should only be set to Yes for courses that have final exams. Research courses, such as 651, 701, and the 400T, 500T, 600T series, should not have the Final Exam field set to Yes as these courses don't have final exams.
When the Final Exam field is set to Yes, a final exam will only be scheduled if the course falls into the university's final exam schedule.
Final exams may be scheduled for courses outside the grid by emailing courses@case.edu.
The final exam flag does not appear anywhere that students can see it and is used solely for scheduling the final exams.
Enter a Facility ID or request a room in the Requested Room field.
If this class needs a room to be scheduled by the University Registrar's Office, enter TBS TBS in the Facility ID field and list the requested room below.
If your department will be responsible for scheduling the room without assistance from the University Registrar's Office, enter TBA in the Facility ID field.
Select a Meeting Pattern for this class section by clicking the Look Up Pat icon and selecting the appropriate pattern from the search results. If the meeting pattern you wish to use for the class does not appear in the list, leave this field blank and check the checkboxes below the appropriate days of the week on which the class will be offered.
Enter a Meeting Start time and press [Tab] on your keyboard.
Enter the time without formatting (e.g., colons). The SIS will format the time for you.
Enter whole hours as the number followed by "a" for AM or "p" for PM (e.g., 1p, 10a).
Enter all other times as a series of four numbers followed by "a" or "p" (e.g., 0945a, 1210p).
The Meeting End field will populate with the appropriate meeting end time for the class section, given its Meeting Pattern. It can be changed as necessary, but all nonstandard meeting times must be approved by the academic organization's dean.
Enter the EmplID of the instructor for the class section into the ID field. Click the Look Up ID icon for a searchable list of instructors.
If an instructor does not appear, the individual may not be listed in SIS as an instructor yet. Fill out and submit an Add/Inactivate an Instructor/TA/Grading Proxy Form to the Office of the University Registrar to have an individual made available as an instructor in SIS.
The Instructor Role, Print option, and Access fields populate based on the Instructor's data on the Instructor/Advisor table.
Instructor Role: The primary role assigned to this individual, which determines the defaults of the Print and Access fields.
- Primary Instructor
- Secondary Instructor
- Teaching Assistant
- Grading Proxy
Print: If the instructor should appear in Class Search, then this checkbox should be checked. Only Primary and Secondary Instructor roles have the Print checkbox checked by default.
Access: Determines the access that the individual has to the Grade Roster in the SIS.
Approve: The instructor can both enter and approve (submit) grades in the Grade Roster. This is the default for Primary and Secondary instructors roles.
Grade: Instructor can enter and save grades but not approve (submit) them. This is the default for TA and Grading Proxy roles.
Click the Enrollment Control tab.
The Enrollment Capacity field defaults from the course catalog and can be changed if necessary.
If the Enrollment Capacity is greater than the room capacity of the room selected on the Meetings tab for this section, then a warning will appear when the course offering is saved.
If students should obtain consent before enrolling in the class, select the appropriate value from the Add Consent drop down box.
If students should obtain consent before dropping the class, select the appropriate value from the Drop Consent drop down box.
Click Save.
This completes the process of adding a section to a course offering.
Refer to other guides to assist with additional edits to the schedule of classes.
